UNIT INDEX

    What does 1042 miles look like?

    Blank map of the United States, territories not included Alabama Arizona Arkansas California Colorado Connecticut Delaware Florida Georgia Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia West Virginia Wisconsin Wyoming District of Columbia District of Columbia
    1042 miles

    1042 miles visualized.

    How far is 1,042 miles?

    1,042 miles is easier to grasp when it is placed on a map. Against the contiguous United States, it is about 35% of the reference span; the comparisons that follow use recognizable real-world distances.

    1,042-Mile Distance Comparisons

    • 1,042 miles is about 1.1 times the 965-mile Washington, D.C. to New Orleans.

      On a map, Washington, D.C. in the United States and New Orleans in the United States are separated by about 965 miles. The figure is calculated from the cities' geographic coordinates, so it describes map span rather than a driving itinerary. Placed end to end, that reference would fit into this distance about 1.1 times.

      Source: GeoNames geographic coordinates

    • 1,042 miles is approximately 93% of the 1,126-mile San Antonio to San Diego.

      On a map, San Antonio in the United States and San Diego in the United States are separated by about 1,126 miles. The figure is calculated from the cities' geographic coordinates, so it describes map span rather than a driving itinerary. The reference would extend about 1.1 times farther than this distance.

      Source: GeoNames geographic coordinates

    • 1,042 miles is about 1.1 times the 961-mile Orlando to Dallas.

      On a map, Orlando in the United States and Dallas in the United States are separated by about 961 miles. The figure is calculated from the cities' geographic coordinates, so it describes map span rather than a driving itinerary. The larger distance is roughly 1.1 times the length of that reference.

      Source: GeoNames geographic coordinates

    • 1,042 miles is about 1.1 times the 961-mile Baltimore to Kansas City.

      On a map, Baltimore in the United States and Kansas City in the United States are separated by about 961 miles. The figure is calculated from the cities' geographic coordinates, so it describes map span rather than a driving itinerary. The larger distance is roughly 1.1 times the length of that reference.

      Source: GeoNames geographic coordinates

    • 1,042 miles is about the same distance as the traditional Iditarod race route.

      The sled-dog race crosses Alaska between the Anchorage area and Nome, with the exact course varying by year and conditions. The difference is only 42 miles.

      Source: Iditarod Trail Committee

    • 1,042 miles is about 2.3 times the 444-mile Natchez Trace Parkway.

      The parkway follows a historic travel corridor through Mississippi, Alabama, and Tennessee. The larger distance is roughly 2.3 times the length of that reference.

      Source: National Park Service

    • 1,042 miles is approximately 72% of the 1,450-mile Colorado River.

      The Colorado River flows from the Rocky Mountains through the American Southwest toward the Gulf of California. That makes the comparison a little over 72% complete from end to end.

      Source: U.S. Bureau of Reclamation

    • 1,042 miles is equivalent to driving 60 mph for 17 hours 22 minutes.

      This calculation assumes a constant 60 mph with no stops, traffic, or delays. An actual road trip would normally take longer.

    • 1,042 miles is approximately 1,677 kilometers.

      Using the exact conversion of 1 mile to 1.609344 kilometers, the distance converts to 1,676.9 kilometers before rounding.

    Reference measurements are rounded where appropriate. Route lengths can change as official alignments are updated.