UNIT INDEX

    What does 142 metres look like?

    142 metres across 2 Soccer Fields

    How long is 142 metres?

    142 metres is easier to picture beside familiar, measured objects, venues, vehicles, and landmarks.

    142-Metre Distance Comparisons

    • Measured against the length of Concorde, 142 metres spans about 2.3 times that reference.

      The comparison uses the published dimension, converted into the same unit before the proportion is calculated.

      Source: Royal Air Force Museum

    • Measured against the recommended length of a football pitch, 142 metres spans about 1.4 times that reference.

      Using the source measurement of 105 metres, this comparison puts the target at 1.4 of it.

      Source: FIFA

    • 142 metres is about 82% of the height of the completed Tower of Jesus Christ.

      Its published measurement is 172.5 metres; the ratio is calculated from that figure.

      Source: Official Sagrada Família site

    • 142 metres is about 1.7 times the height of the General Sherman tree.

      The comparison uses the published dimension, converted into the same unit before the proportion is calculated.

      Source: National Park Service

    • Measured against the 110-metre hurdles event, 142 metres spans about 1.3 times that reference.

      Using the source measurement of 110 metres, this comparison puts the target at 1.3 of it.

      Source: World Athletics

    • 142 metres is about 3.2 times the length of an Airbus A321neo.

      The comparison uses the published dimension, converted into the same unit before the proportion is calculated.

      Source: Airbus

    • For scale, 142 metres is about 3.7 times the height of Christ the Redeemer including pedestal.

      Using the source measurement of 38 metres, this comparison puts the target at 3.7 of it.

      Source: Brazil Ministry of Tourism

    • 142 metres is approximately 465.9 feet.

      Using the exact conversion that 1 metre equals exactly 3.280839895 feet, the unrounded result is 465.879 feet.

    Reference measurements are rounded where appropriate, and naturally variable objects are described as approximate, typical, or maximum sizes.