UNIT INDEX

    What does 17 centimetres look like?

    17 cm across 2 Credit Cards

    How long is 17 centimetres?

    The sourced comparisons below place 17 centimetres alongside recognizable real-world dimensions from several categories.

    17-Centimetre Distance Comparisons

    • For scale, 17 centimetres is about 40% of the short side of an A2 sheet.

      Using the source measurement of 42 centimetres, this comparison puts the target at 40% of it.

      Source: International Organization for Standardization

    • For scale, 17 centimetres is about 1.4 times the diameter of a standard compact disc.

      Using the source measurement of 12 centimetres, this comparison puts the target at 1.4 of it.

      Source: Ecma International

    • Measured against the long side of a €50 note, 17 centimetres spans about 1.2 times that reference.

      Using the source measurement of 14 centimetres, this comparison puts the target at 1.2 of it.

      Source: European Central Bank

    • For scale, 17 centimetres is about 1.6 times the diameter of a regulation golf hole.

      Its published measurement is 10.8 centimetres; the ratio is calculated from that figure.

      Source: International Tennis Federation

    • For scale, 17 centimetres is about 11% of the width of a table-tennis table.

      Its published measurement is 152.5 centimetres; the ratio is calculated from that figure.

      Source: International Table Tennis Federation

    • Measured against the diameter of a 2-cent euro coin, 17 centimetres spans about 9.1 times that reference.

      Using the source measurement of 1.88 centimetres, this comparison puts the target at 9.1 of it.

      Source: European Commission

    • 17 centimetres is about 1.1 times the long side of a €200 note.

      Using the source measurement of 15.3 centimetres, this comparison puts the target at 1.1 of it.

      Source: European Central Bank

    • 17 centimetres is approximately 6.7 inches.

      Using the exact conversion that 1 centimetre equals exactly 0.3937007874 inches, the unrounded result is 6.693 inches.

    Reference measurements are rounded where appropriate, and naturally variable objects are described as approximate, typical, or maximum sizes.