UNIT INDEX

    What does 30 centimetres look like?

    30 cm across 4 Credit Cards

    How long is 30 centimetres?

    Rather than leaving 30 centimetres as an abstract number, these examples translate it into familiar scale.

    30-Centimetre Distance Comparisons

    • For scale, 30 centimetres is about 2.5 times the diameter of a standard compact disc.

      Its published measurement is 12 centimetres; the ratio is calculated from that figure.

      Source: Ecma International

    • Measured against the height of a regulation table-tennis table, 30 centimetres spans about 39% of that reference.

      Its published measurement is 76 centimetres; the ratio is calculated from that figure.

      Source: International Table Tennis Federation

    • 30 centimetres is about 1.4 times the long side of an A5 sheet.

      Its published measurement is 21 centimetres; the ratio is calculated from that figure.

      Source: International Organization for Standardization

    • 30 centimetres is about 2 times the long side of a €200 note.

      The comparison uses the published dimension, converted into the same unit before the proportion is calculated.

      Source: European Central Bank

    • Measured against the long edge of an ISO ID-1 payment card, 30 centimetres spans about 3.5 times that reference.

      Using the source measurement of 8.56 centimetres, this comparison puts the target at 3.5 of it.

      Source: International Organization for Standardization

    • For scale, 30 centimetres is about 28% of the height of a tennis net at the posts.

      Using the source measurement of 107 centimetres, this comparison puts the target at 28% of it.

      Source: International Tennis Federation

    • For scale, 30 centimetres is about 3.9 times the short side of a €50 note.

      Its published measurement is 7.7 centimetres; the ratio is calculated from that figure.

      Source: European Central Bank

    • 30 centimetres is approximately 11.8 inches.

      Using the exact conversion that 1 centimetre equals exactly 0.3937007874 inches, the unrounded result is 11.811 inches.

    Reference measurements are rounded where appropriate, and naturally variable objects are described as approximate, typical, or maximum sizes.