What does 426 square metres look like?

426-Square-Metre Area Comparisons

• 426 square metres covers approximately 92% of the area of 4 Elite dodgeball courts.

  The reference qualifier matters here: the figure describes the stated area, not a larger surrounding venue or site.

  Source: DIMENSIONS

• 426 square metres covers approximately 1.02 times the area of 100-table combined table-tennis playing surfaces.

  This uses tabletop surfaces only, not venue floor; family capped, keeping the comparison tied to the defined surface or footprint.

  Source: ITTF

• 426 square metres covers approximately 1.02 times the area of 14 standard 40-foot container footprints.

  The reference qualifier matters here: the figure describes the stated area, not a larger surrounding venue or site.

  Source: ISO-CONTAINER

• 426 square metres covers approximately 1.04 times the area of 5-court badminton playing layout.

  Both areas are expressed in square metres and compared proportionally from the source measurement.

  Source: BWF

• In area, 426 square metres works out to roughly 1.63 times the area of regulation tennis doubles court.

  Both areas are expressed in square metres and compared proportionally from the source measurement.

  Source: ITF

• Picture 426 square metres as nearly 53% of the area of international team-handball court.

  The reference qualifier matters here: the figure describes the stated area, not a larger surrounding venue or site.

  Source: IHF

• 426 square metres is about 98% of the area of planned Theodore Roosevelt North Unit center.

  The calculation compares the published 437-square-metre reference area with the requested area.

  Source: NPS

• 426 square metres is approximately 4,585.4 square feet.

  Using the exact conversion that 1 square metre = 10.7639104167 square feet, the unrounded result is 4,585.426 square feet.