UNIT INDEX

    What does 10 metres look like?

    10 metres across 1 City Bus

    How long is 10 metres?

    10 metres is easier to picture beside familiar, measured objects, venues, vehicles, and landmarks.

    10-Metre Distance Comparisons

    • For scale, 10 metres is about 2.8 times the diameter of the ESO 3.6-metre telescope.

      Its published measurement is 3.6 metres; the ratio is calculated from that figure.

      Source: European Southern Observatory

    • Measured against the typical upper length of an adult blue whale, 10 metres spans about 33% of that reference.

      Using the source measurement of 30 metres, this comparison puts the target at 33% of it.

      Source: NOAA Fisheries

    • Measured against the depth of a football goal area, 10 metres spans about 1.8 times that reference.

      The comparison uses the published dimension, converted into the same unit before the proportion is calculated.

      Source: FIFA

    • For scale, 10 metres is about 14% of the height of the Taj Mahal.

      Its published measurement is 73 metres; the ratio is calculated from that figure.

      Source: Archaeological Survey of India

    • Measured against the wingspan of an Airbus A380, 10 metres spans about 13% of that reference.

      The comparison uses the published dimension, converted into the same unit before the proportion is calculated.

      Source: Airbus

    • Measured against the minimum height of a rugby corner flag, 10 metres spans about 8.3 times that reference.

      Its published measurement is 1.2 metres; the ratio is calculated from that figure.

      Source: World Rugby

    • Measured against the height of the General Sherman tree, 10 metres spans about 12% of that reference.

      Its published measurement is 83.8 metres; the ratio is calculated from that figure.

      Source: National Park Service

    • 10 metres is approximately 32.8 feet.

      Using the exact conversion that 1 metre equals exactly 3.280839895 feet, the unrounded result is 32.808 feet.

    Reference measurements are rounded where appropriate, and naturally variable objects are described as approximate, typical, or maximum sizes.